iProtect 1207 Bug Detector

The Protect 1207i Bug Detector is a new detecting device that can be successfully used by engineers or counter-surveillance specialists as a reliable tool for tracing different digital transmissions such as GSM, Bluetooth, etc.
New methods of 'listening and watching' with the help of modern technologies have become widely spread in our times. For example, a tiny GSM transmitter is accessible at practically any internet spy shop for only 10—20 USD and can listen to all your conversations in the office or at home. And perhaps, more importantly, the Bluetooth protocol has been specially designed to transmit voices or conversations with high quality at a distance of up to 100 m - it can easily be used for bugging.
5 Items
Hurry up! only 5 items left in stock!
€786.25
Tax included

The sensitivity of a common RF detector (bug detector) is spread along with a wide frequency range, usually 3, or even 6-7 GHz. This means the common detector cannot detect such weak and non-continuous signals as Bluetooth, Wi-Fi, or Wi-Max. Even more powerful signals like GSM-1800 are also hard to detect because of their low sensitivity at higher frequency ranges.

The only way to reliably detect wireless protocols is to use pre-selector chips (saw filters) which attenuate all other signals except the desired ones. This is the method implemented in the Protect 1207i which has 6 channels for different frequency ranges and can simultaneously detect 6 different kinds of transmissions at a distance much more significant than any common RF detectors.

Such qualities make the Protect 1207i a very desirable and reliable device during counter-surveillance sweeps.

 

Detect the following kinds of bugging devices:

GSM baby monitors; GSM alarm/GSM bugs; GSM/GPRS/EDGE;3G video cameras; GSM Spy phones; Bluetooth bugging devices; GPS Trackers; Spy phones with Bluetooth/Wi-Fi; Wi-Fi/Wi-Max bugging devices; Wireless video cameras 2.4 GHz.

The Protect 1207i Bug Detector is a portable device for the inspection and location of wireless sources; it 6 channels of detection for different kinds of protocols; Detection of GSM/CDMA/3G; Detection of Bluetooth/Wi-Fi/Wi-Max; It Can be used for tracing both regular sources and illegal eavesdropping devices;6 bar graphs with 10-segments each, for accurate location of RF sources;4 modes: Silent, Vibration, Visual and Listen;2 levels of sensitivity (attenuator); Extra display shows probable protocol; Durable metallic body; Microprocessor controlled; Setup mode with selection the threshold level for vibration.

Specifications:

Frequency range (up-link bands): 

CDMA: 824—849 MHz

GSM: 880—920 MHz

GSM (DCS): 1710—1790 MHz

WCDMA, 3G, GSM (PCS), DECT: 1920—2000 MHz

Bluetooth, Wi-Fi: 2400—2480 MHz

Wi-Max: 3000—7000 Mhz

Out-of-band attenuation: 20—45 dB

Antenna: 2 Omni-directional antennas

Detection distance: 1—10 meters

Operation time: 10—15 hours

Power: 2 AAA (LR03) batteries

Dimensions (without antennas): 120×70×16 mm

Weight: 217 g.

5 Items